Supreme Audio Power AC Regeneration With Battery Backup

The ProPower 490 battery back-up power re-generator quietly generates a new, clean, 120 volt 60 cycle sine wave right beside your audio or home theater system, so there is no opportunity for outside influences to introduce unwanted waveform distortions. It features 2 pass-through high current receptacles for larger power amps but the 490′s output of 750 watts on short duration and 1000 watts peak is more than enough for mid-sized stereo amps and high powered 7.1 channel home theater receivers in a normal sized room. The 490′s on-board battery system provides the reference voltage, and provides total isolation for your system from the utility power, regardless of whats occurring on the utility line, even in a black-out.

 

Features

  • 1000 VA/490 watts continuous load, 750 watts short duration, 1000 watts peak
  • 10 amps RMS, 14 amps short duration, 18 amps peak
  • 6 Hubbell NEMA 5-15 outlets / 2 Hour Battery Back-up
  • Ideal for 2 channel and mid-power home theater, DAC’s, Headphone Amps

 

ProPower 490 Specifications

Electrical Input: Nominal Voltage 120 VAC
Voltage Range: 80-144 VAC
Frequency: 50 / 60 Hz Auto-sensing
Frequency range: 45-65 Hz
Input Connection: IEC 320-C13 Input receptacle (15 amp)
Electrical Output: output Voltage 120 VAC
Voltage Regulation: ±3% of nominal
Frequency Regulation: ±.1 Hz
Efficiency: 89-92% depending on load
Output receptacles: (6) Hubbell NEMA 5-15R (2 Pass-Through High Current)
Physical Characteristics:
Shelf component or Rack mountable (racking hardware included)
Dimensions: 3.5″ H x 17″ W x 19.4″ D. (89 x 432 x 494 mm)
Weight: 44 lbs (20 kg)
Environmental and Safety: UL and CSA
EMC monitors: FCC Class B and VCCI Class II Surge Supression: IEEE / ANSI C62.41 Category B (formerly 587)
Ambient Operating Temp: 32 – 90°F (0 – 32°C)
Audible noise: >17 dBA
Relative humidity: 0 to 90% non-condensing
Additional Features:
F-Type (coax) surge protection
Phone line surge protection: 1 line input, 2 lines output (on power strip option)
RJ 45 Transient protector: Input and output jack for RJ-45 cable protection,
UL497A tested (on power strip option)
Automatic bypass on sustained overload or AVPS failure
Diagnostics: Full system self-test on power up